Two-Part Finish Mix-by-Weight Calculator
Split a desired batch weight into components A and B using the product's specified weight ratio.
Set up your calculation
An illustrative example is loaded. Replace its values with your measurements, costs or documented settings.
Calculation
Your result
- Component A weight
- 200 g
- Component B weight
- 100 g
- Total mixed weight
- 300 g
The quote handoff carries your inputs and assumptions. Only an explicit base cost is suggested as a quote cost; prices, rates and measurements remain planning notes.
Method & assumptions
Component A = total batch weight × A ratio ÷ (A ratio + B ratio). Component B is the remainder.
- For manufacturer-specified ratios BY WEIGHT only. A volume ratio cannot be substituted without the correct component densities.
- No thinner or additive is included. Follow the product's mixing, ventilation, PPE and pot-life instructions; example values are not a product recommendation.
Work through the finish mix ratio example
| Input or step | Example value |
|---|---|
| Example inputs | 300 g batch at a manufacturer-specified 2:1 weight ratio |
| Component A weight | 200 g |
| Component B weight | 100 g |
| Total mixed weight | 300 g |
These values match Load example. They illustrate the method, not recommended material, machine or pricing settings. Read the assumptions before using the result.
Common questions
Are the example settings a recommendation?
No. Replace the example with measured dimensions, actual costs and your product or machine manufacturer's limits.
What if an input is incomplete or impossible?
The result is hidden and a field or calculation error explains what needs correction.
Use this in your project
Continue with the next measurement or cost, then keep the assumptions with your quote.
Learn the WoodWorkCalc workflow · Build your workshop skills in the Academy · Browse all calculators