Beginner · CNC
A personal CNC desk sign
Start with a small sign blank and learn workholding, lettering and a repeatable zero.
180 × 80 × 12 mm sign blank; artwork added in your CAM software.
A good idea, ready to plan
Choose a project. Get a build plan.
Explore materials, bits, setup checks and build steps for a project. Customize the plan and estimate what it will cost.
Start with your setup
Packages match a process. Check every panel, jig and blank against your machine’s usable area, thickness limits and workholding clearance.
Choose something worth making
2 packages
Advanced · CNC
CNC sign batch
Move from one sign to a planned batch with stock layout, labeling and real job costs.
Six 400 × 250 × 18 mm blanks; engraving designed in CAM.
Build a settings record you can trust
Start from the exact machine, tool and material guidance. These packages are planning templates; they have not been physically validated on every listed machine.
CNC setup
Record cutter diameter, flutes, stickout, RPM, feed units, depth per pass, stepover and workholding. Simulate, check the origin and make a scrap test before committing stock.
Laser setup
Record module and power, material thickness, speed with units, passes, focus, air and measured kerf. Use approved materials and the manufacturer’s ventilation and operating instructions.
Build the skill before you build the batch.
Start with the smallest test that answers the question. These illustrations explain the process; they are not cutting files or tested settings.
Three cutter shapes to recognize
Buy the cutters your first toolpaths require. Confirm shank and collet compatibility, cutting length, geometry and the tool maker’s limits. A large assortment does not replace the correct tool.
Test the material, then test the fit
First find usable engraving or cutting behavior on matching scrap. Then measure thickness and test the joint. A tab that fits one sheet may bind or wobble in the next batch.
Keep speed units, module, material, passes and focus with the result. Color in this diagram is illustrative, not a power recommendation.
One successful prototype
Measure the finished part, test assembly and complete the intended finish. Keep the failed coupons and notes; they show what changed.
A short repeatability run
Make three as an example learning exercise. Compare dimensions, registration and finish, and record real hands-on time.
A batch you can cost
Only increase quantity after the process repeats. Include setup, waste, rework, maintenance and packaging when you price it.
Before committing to an expensive setup: try a supplier-cut blank, a makerspace session or an outsourced sample where available. Bring your own file and material requirements, and compare the complete result with what you intend to sell or keep.